There are two things that I’ve done consistently for 18 years I’ve been using a computer to make music is to experiment with random processes to generate something musically.
EXAMPLE ENSEMBLE: http://www.cornwarning.com/xfer/AbletonLiveRandomizeExample.zip
Ableton Live has a ton of effects. People spend a lot of time and money (or time looking for W4R3Z, which imho is wasted) to find third party VST instruments and effects to give them a palette of sounds. But before you go crazy buying and downloading stuff, it’s a good idea to fully explore the stuff built in to Live.
The Live MIDI effects are an under-utilized resource for creative sequencing, and the MIDI effect rack I’ve built does something that is to me really inspirational: It takes a stream of midi notes and randomizes their pitch and velocity.
That doesn’t seem like much except for this particular context: If you have a drum rack after this MIDI effect rack, when a MIDI note occurs, it adds a random offset to the note number, and assigns a random velocity. If you load a drum rack with an assortment of sounds — in the case of my example, latin percussion samples — it will generate endless variety of drum patterns with continuously changing accents.
From left to right the components of this rack are
- Pitch Effect. Adds a fixed offset to incoming notes.
- Random Effect. Adds a random offset to incoming notes.
- Velocity Effect. Randomly changes velocity of incoming notes.
- Velocity Effect. Filters out notes with velocity outside the range lowest to lowest+range.
The actual rhythm is determined by the note pattern that’s playing in the current MIDI track. This is cool because you can use groove templates on (for example) clip with a steady stream of 16th notes, and the output of the rack will follow the groove template. Every time a note is triggered by the clip, a random offset is added to the pitch, which has the effect of choosing a different drum sound, with a random velocity.
The Macro controls on the left side give you control over various parameters.
- Lowest: notes with velocities below this value won’t play
- Range: notes with velocities above Lowest+Range won’t play
- Pitch: Constant offset added to incoming note numbers
- Rand Velocity: How much randomness is added to incoming note velocities
Here’s a use case: If you play the third clip in the KW Conga track in the example ensemble, it is a steady stream of notes with a pitch of C1, which in my drum rack corresponds to the first sound. If you don’t want a hit on every 16th note, turning up the Lowest knob will discard notes with low velocity, and turning down Range discards notes with higher velocity. You tune the velocity range with these two knobs to thin out the incoming stream of notes by discarding some of the lowest and highest velocity notes.
The Pitch knob is to get around a limitation of the Random MIDI effect — it only goes up to a maximum offset of 24. Since I have more than 24 sounds loaded in the drum rack, in order to play any of the sounds more than 2 octaves above C1, I have to add an offset. You can also play this knob — or automate it — to change the set of sounds played by the incoming notes. In this particular rack, all the flams are at the top of the drum rack’s note range, so if the Pitch knob is below 8, you won’t get any flams.
The Rand Velocity knob, if turned to zero, doesn’t change incoming velocities at all. This would be useful in the case where you want the Velocity of the Groove template to determine note volumes.
All this is harder to explain than it is to use. Try downloading the example ensemble and fiddle with the knobs, and I think you’ll find that there’s an intuitive feel to using this effect rack. The main thing you need to start with is a drum rack — like the conga rack in the example — driven by clips usually consisting of C1 notes, which is the default lowest note for drum racks. The more sounds you add to your drum rack the more useful the pitch knob will be; if you only have 24 sounds, turning up Pitch will just cause notes to be sent to empty slots in the drum rack.
And if you don’t want to just let this sort of constrained randomness do its thing forever, you can record the output of the MIDI rack in another MIDI track, and then choose a few bars to loop, or find the 4 bars that’s almost perfect and tweak it a bit.
This sort of technique isn’t limited to drum sounds. If you’re using this rack with a pitched instrument it will do something random, and perhaps useful. With a pitched instrument, you can add a Scale Live MIDI effect, in order to constrain the notes played to the scale of your choice.
And that’s only the beginning of what you can do with effect racks. Live’s MIDI effect racks have the same ‘multi-chain’ feature of Live Effect and Instrument Racks — you can set up different chains of MIDI effects and use the Chain Select control to choose between them. And once you add in Max For Live MIDI effects, things can really get crazy.